Featured Products
Photoelectric Smoke Alarm AK-218A
EN14604-compliant photoelectric smoke alarm with 10-year lithium battery. Response time <30 seconds, 40m² coverage. Suitable for residential, commercial, and warehouse environments.
Detail
Specifications
Overview
Photoelectric smoke detector operating on the light-scattering principle. Unique structural design and optical signal processing provide dust resistance, insect resistance, and immunity to ambient light interference — ensuring long-term stable operation. Responds well to both slow smouldering and open-flame smoke. Suitable for homes, shopping centres, hotels, warehouses, and other indoor environments.
Specifications
| Parameter | Value |
|---|---|
| Model | AK-218A |
| Power supply | DC 9V / 1200mAh lithium battery (10-year lifespan) |
| Operating current | Standby <10 μA, Alarm <25 mA |
| Alarm output | Audible/visual alarm, normally open signal (COM/NO) |
| Alarm indicator | Red LED flash + buzzer |
| Buzzer volume | 85 dB (at 10 ft) |
| Response time | <30 s |
| Coverage area | 40 m² |
| Operating conditions | -20–70°C, Humidity 10%–90% (non-condensing) |
| Low battery alert | Chirps every 40 seconds |
| Dimensions | Φ126mm × 34mm |
| Housing material | ABS |
| Weight | 144 g |
| Standard | EN14604:2005/AC:2008 |
Installation
- Mark two fixing holes on ceiling or wall using the bracket as a template; insert plastic anchors and mount the bracket firmly
- Insert battery into the rear compartment; rotate the alarm clockwise until it clicks into place
- After installation, the LED flashes approximately once per minute to indicate normal operation
Testing: Hold the test button for at least 3 seconds — a clear pulsed alarm tone indicates normal function.
Installation Guidelines
- Avoid locations near doors, windows, or fans where air moves quickly
- Do not install in bathrooms or other high-humidity / high-temperature areas
- Keep a 0.5m clear space around the detector
- Minimum 1.5m horizontal distance from air conditioning vents; minimum 0.5m from walls and beams
- Install horizontally; maximum tilt angle 45°
- Conduct a simulated fire test every six months
Maintenance
Clean with a soft brush every six months. If the test button produces no sound or smoke testing fails, check the power supply or contact us for service.